3D baskı için plaka üretici
Plaka Atölyesi, scooter, motosiklet, bisiklet, model araç ve dekoratif projeler için baskıya hazır plaka modelleri üreten ücretsiz bir araçtır. Yazınızı yazarsınız, ölçüleri ayarlarsınız, STL veya 3MF dosyasını indirirsiniz.
Tamamen tarayıcınızın içinde çalışır. Kayıt yok, kurulum yok, sunucuya gönderilen hiçbir veri yok. Sayfayı bilgisayarınıza kaydederseniz internet bağlantısı olmadan da çalışmaya devam eder.
Nasıl kullanılır
- Yazıyı girin. Üst ve alt satırı doldurun. Küçük harfler otomatik olarak büyük harfe çevrilir; Ç, Ğ, İ, Ö, Ş, Ü karakterleri desteklenir.
- Düzeni seçin. İki satır, Türkiye'deki motosiklet plakalarının biçimidir ve kare oranlı plakalarda harfleri daha büyük tutar. Tek satır otomobil plakası görünümü verir.
- Ölçüleri ayarlayın. Genişlik, yükseklik, çerçeve kalınlığı, köşe yarıçapı ve kabartma yüksekliği milimetre cinsindendir. Önizleme anında güncellenir.
- Dosyayı indirin. Tek renk basacaksanız STL yeterlidir. Çok renkli basacaksanız renk başına ayrı STL indirin.
Baskı ayarları
Malzeme
PETG veya ASA kullanın. PLA güneşte park eden bir araçta deforme olur; siyah bir plaka yaz ortasında 60 °C üzerine rahatlıkla çıkar. ASA, UV dayanımı en yüksek seçenektir.
Dilimleyici
- Plakayı yatay yerleştirin, destek gerekmez.
- 0,2 mm katman yüksekliği ve %15 dolgu yeterlidir.
- Üst yüzey kalitesi için en az 4 üst katman verin.
Üç renk
Plaka üç ayrı renk bölgesinden oluşur: taban, çerçeve ve yazı, bir de ülke bandının zemini. Band zemini kabartmanın yarısı kadar yükselir; böylece tek renk basanlar da TR harflerini kabartma olarak görür. Zemini istemiyorsanız kapatabilirsiniz.
Bambu Studio / Orca projesi
Bu seçenek, taban ve kabartmayı tek nesnenin iki parçası olarak kaydeder ve 1. ve 2. filamana atar. Dosyayı açtığınızda parçalar hazır atanmış gelir; renkler kendi AMS yuvalarınızdaki filamentlerden gelir, dosya renk dayatmaz. Yazıcı ve baskı ayarlarınıza dokunulmaz.
Önce filament sayısını ayarlayın. Band zemini açıkken model üç parçadır ve 1, 2, 3 numaralı filamanlara atanır. Projenizde yalnızca iki filament yüklüyse Bambu Studio üçüncü parçayı ikinciye düşürür ve band zemini çerçeveyle aynı renkte çıkar. Dosyayı açmadan önce Project Filaments bölümündeki + ile üçüncü filamanı ekleyin. Dosyayı zaten açtıysanız nesne listesinden band-zemini parçasına sağ tıklayıp filamanı elle 3 yapın; kırpılan atama kendiliğinden düzelmez. İki renk yetiyorsa Zemini renklendir anahtarını kapatın, model iki parçaya döner.
Bambu Studio açarken "The 3mf is generated by old Bambu Studio, load geometry data only" uyarısı verebilir. Bu mesaj yanıltıcı: gerçek anlamı, dosyanın proje ayarları içermediğidir. Filament atamaları korunur — Bambu Studio ayarları sıfırlarken bu bilgiyi bilinçli olarak saklayıp geri yükler. "Don't show again" işaretleyip geçebilirsiniz. Dosyaya proje ayarları koymak uyarıyı susturur ama sizin yazıcınıza ait olmayan geçersiz bir profil oluşturup yazdırmayı engeller; bu yüzden bilerek koymuyoruz.
İki renkli baskı
Tek nozullu yazıcıda, künyede yazan renk değişimi yüksekliğinde filament değişimi ekleyin. Taban bir renk, çerçeve ve yazı başka renk çıkar.
AMS veya çok nozullu yazıcıda "Renk başına ayrı STL" indirin. Taban dosyasını içe aktarın, nesneye sağ tıklayıp Parça ekle → Mevcut dosyadan ile kabartma dosyasını ekleyin, sonra her parçaya filament atayın. İki parça aynı koordinat sisteminde olduğu için üst üste tam oturur.
Sık sorulan sorular
STL dosyası renk taşır mı?
Hayır. STL formatının standardında renk alanı yoktur. Bazı programlar üçgen başına ayrılmış 2 baytlık alana renk sıkıştırır ama Bambu Studio, Orca, Cura ve PrusaSlicer bunu okumaz. Çok renkli baskı için ya 3MF kullanın ya da renk başına ayrı STL indirin.
Türkçe karakterler çalışıyor mu?
Evet. Ç, Ğ, İ, Ö, Ş, Ü ve yaygın Avrupa aksanlı harfleri gömülü yazı tipinde mevcuttur. Yazı tipinde olmayan bir karakter girerseniz önizlemenin altında uyarı çıkar.
Kaç karakter sığar?
Sınır yok; yazı otomatik olarak alana sığacak şekilde ölçeklenir. Ancak karakter arttıkça harfler küçülür. 100 × 60 mm bir plakada iki satır düzeniyle satır başına 6–7 karakter rahat okunur kalır.
Montaj için delik açabilir miyim?
Evet, delik çapı ve aralığı ayarlanabilir. İki satır düzeninde delikler satır aralığına denk gelir. Alternatif olarak 3M VHB bant en temiz çözümdür ve plakayı delmez.
Bu gerçek bir tescil plakası mı?
Hayır. Üretilen parça dekoratiftir. Türkiye'de resmi tescil plakaları yalnızca yetkili plakacılar tarafından basılabilir. Elektrikli scooterlar zaten tescile tabi değildir.
Verilerim nereye gidiyor?
Hiçbir yere. Tüm hesaplama tarayıcınızda yapılır; yazdığınız metin ve ürettiğiniz dosya cihazınızdan çıkmaz.
License plate generator for 3D printing
Plate Studio is a free tool that produces print-ready plate models for scooters, motorcycles, bicycles, scale models and decorative projects. Type your text, set the dimensions, download an STL or 3MF file.
Everything runs inside your browser. No account, no installation, nothing sent to a server. Save the page to your computer and it keeps working with no internet connection.
How to use it
- Enter your text. Fill in the top and bottom line. Lower case is converted to capitals automatically, and accented characters are supported.
- Pick a layout. Two lines is the motorcycle plate format and keeps letters larger on squarish plates. One line gives the car plate look.
- Set the dimensions. Width, height, border thickness, corner radius and emboss height are all in millimetres. The preview updates as you type.
- Download. A single STL is enough for one colour. For multi-colour printing, download a separate STL per colour.
Print settings
Material
Use PETG or ASA. PLA deforms on a vehicle parked in the sun — a black plate easily passes 60 °C in midsummer. ASA has the best UV resistance.
Slicer
- Lay the plate flat; no supports needed.
- 0.2 mm layer height and 15% infill are plenty.
- Use at least 4 top layers for a clean surface.
Three colours
The plate is made of three colour regions: the base, the border and lettering, and the country band panel. The panel rises half the emboss height, so even a single-colour print keeps the band letters raised. You can turn the panel off if you don't want it.
Bambu Studio / Orca project
This option saves the base and the emboss as two parts of a single object, assigned to filament 1 and 2. Open the file and the parts are already assigned; the colours come from whatever is in your own AMS slots — the file does not force colours, and it leaves your printer and print settings untouched.
Set the filament count first. With the band panel on, the model has three parts assigned to filaments 1, 2 and 3. If your project only has two filaments loaded, Bambu Studio clamps the third part down to the second, and the band panel comes out the same colour as the border. Add a third filament with the + button in Project Filaments before opening the file. If you already opened it, right-click the band-panel part in the object list and set its filament to 3 by hand — the clamped assignment does not fix itself. If two colours are enough, turn off Colour the panel and the model drops to two parts.
Bambu Studio may warn "The 3mf is generated by old Bambu Studio, load geometry data only" on opening. The message is misleading: what it actually means is that the file carries no project settings. The filament assignments survive — Bambu Studio deliberately saves and restores them while resetting the config. Tick "Don't show again" and carry on. Embedding project settings would silence the warning but would also create an invalid printer profile that is not yours and blocks printing, so we leave them out on purpose.
Two-colour printing
On a single-nozzle printer, insert a filament change at the colour change height shown in the spec strip. The base prints in one colour, the border and lettering in another.
With an AMS or multi-nozzle printer, download the separate STLs. Import the base file, right-click the object and use Add part → Load from file for the emboss file, then assign a filament to each part. Both parts share the same coordinate system, so they line up exactly.
Frequently asked questions
Can an STL file carry colour?
No. The STL format has no colour field in its specification. Some programs pack colour into the 2-byte per-triangle attribute slot, but Bambu Studio, Orca, Cura and PrusaSlicer all ignore it. For multi-colour printing use 3MF or download a separate STL per colour.
Are accented characters supported?
Yes. Turkish characters and common European accented letters are all in the embedded font. If you type a character the font does not have, a warning appears under the preview.
How many characters fit?
There is no hard limit — the text scales automatically to fit. But more characters mean smaller letters. On a 100 × 60 mm plate with the two-line layout, 6–7 characters per line stay comfortably readable.
Can I add mounting holes?
Yes, both diameter and spacing are adjustable. In the two-line layout the holes fall in the gap between lines. Alternatively, 3M VHB tape is the cleanest option and leaves the plate undrilled.
Is this a real registration plate?
No. What you print is decorative. In most countries official registration plates may only be manufactured by authorised suppliers, and electric scooters are usually not registered at all.
Where does my data go?
Nowhere. All computation happens in your browser; neither your text nor the generated file leaves your device.